Window Decals

The side that will be applied on the surface should be facing up. Remove the backing paper from the topmost part of the window decal and fold down to expose the side applied to the window. 

Spray the application area generously with wet solution.

The solution will let the decal slide across the surface for better positioning.

Once you have applied the topmost section on the sprayed area,

use a squeegee or rubber roller over the decal from the center until the edges to remove any air bubbles. 

Place the static cling over the application surface.

Fold down the topmost portion of the cling and peel off the backing paper. Cut up the backing paper on the application surface before applying the topmost area.

Use a squeegee or a flat object like a credit card to directly apply the cling.

Start from the center and roll until the edges to remove any air bubbles. 

Peel off the rest of the backing 

from the middle and then the bottom portions, repeating step 3 for each of these areas.

Make sure the window is clean before application.

Hold the vinyl up against the applicable area and use masking tape to mark and attach the sides.

Place the vinyl up against the window.

Make sure the taped portions are against the markers.

Slide the squeegee across the decal, moving from the center toward the sides.

Remove the rest of the backing paper and place a firm hold on the perforated vinyl as you roll the squeegee over the decal.

• Choose between static cling or adhesive vinyl
• Standard and custom sizes are available
• Perfect for indoor and outdoor use

Contact Us for a Customized Design & Print Quote!